Supported headsets

Kun slutbruger-hjælpen er for tiden oversat til dansk. Hjælp til installation og administration af Zylinc-løsninger er for tiden på engelsk.

You should currently be able to use the headsets listed in the following with your Zylinc 6.5 solution, because Zylinc supports the SDKs (Software Development Kits) and/or drivers with which the manufacturers claim to support the listed headsets.

It's important to note that the lists of headsets in the following are so long that Zylinc isn't able to continuously test each individual headset in order to confirm that it works with any Zylinc 6.5 solution.

Zylinc supports* the following Jabra devices with the latest version of Jabra Direct:

  • Pro 9470

  • Pro 9465

  • Pro 9460

  • Pro 9450

  • Biz 2300

  • Motion Office

  • Evolve 65 USB

  • Biz 2400 II CC

  • Pro 930

  • Pro 935 (single and dual)

  • Pro 925 (single and dual)

  • Evolve 40

  • Evolve 80

  • Link 265

  • Evolve 30 II

  • Evolve 20

  • Evolve 30

  • Biz 1500

  • Biz 2400 II

  • Link 260

  • Evolve 65t

  • Evolve 75

  • Evolve 75e

  • Engage 50

  • Engage 65

  • Engage 75

  • Motion UC (over Bluetooth)

  • Link 360

  • Link 370

  • Speak 410

  • Speak 510

  • Speak 710

  • Speak 810

  • Link 230

  • Link 850

  • Link 860 (only settings applicable)

* Note the disclaimer at the end of this topic.

Awaiting information from manufacturer.

Zylinc supports* the following Sennheiser devices with the latest version of HeadSetup Pro:

  • Culture series

  • Culture Plus series

  • SC 100 series

  • Circle series

  • Century series

  • MB series

  • PRESENCE series

  • SDW 5000 series

  • DW series

  • SD series

  • D 10 series

  • Dongles

  • Busy light

For all Sennheiser headsets listed in the previous, call control is supported with Sennheiser HeadSetup Pro.

Further Sennheiser headsets may be supported. You can verify whether your headset is supported on www.sennheiser.com/headsetcompatibility.

I can get the latest HeadSetup Pro on Sennheiser's website, but can I use older HeadSetup Pro versions?Lukket We recommend that you use the latest version, but we're aware that many organizations have controlled environments where, for example, update packs can only be rolled out when the IT department has a service window for that purpose. In such cases, it's relevant to know which older versions of HeadSetup Pro are supported. However, this may also depend on, for example, which Windows updates you've installed in your organization. We recommend that you contact Sennheiser to learn which HeadSetup Pro versions you can use.

* Note the disclaimer at the end of this topic.

Many third-party hardware providers don't follow strict lifecycle policies where changes to their hardware and any associated software, firmware, etc. are announced well in advance. This also applies to some phone device and headset manufacturers. Zylinc follows updates to all relevant headsets as closely as possible, and will update the Zylinc solutions to comply with updates as quickly as possible. However, Zylinc isn't responsible for any limitations, etc. in such third-party hardware and its associated software. When you upgrade or downgrade third-party hardware or software that could have an impact on how your Zylinc solution will work, we strongly recommend that you test the upgrade or downgrade in an isolated test environment before you apply the changes in your production environment. You should be especially aware of this if you subscribe to automatic third-party updates. Read full disclaimer.